Fnirsi1014d Firmware Update Work Hot! ● | Working |
Updating your FNIRSI 1014D firmware is a straightforward way to resolve software bugs and potentially improve the device's stability. For many users, keeping the device on the latest official version (currently V3.0) is essential for accurate measurements and smoother interface performance. Step-by-Step Guide: How to Make the Firmware Update Work
To successfully update your FNIRSI 1014D, follow these specific steps to ensure the file is recognized and installed correctly:
Download the Firmware: Visit the official FNIRSI Support Page to find the latest version. The file is typically named FSI-1014.bin.
Connect to PC: Connect your oscilloscope to a computer using a standard USB data cable.
Enable USB Export: On the device, go to MENU → USB export. Your computer should now recognize the oscilloscope as a removable USB drive (often around 8GB).
Prepare the Drive: Open the new drive on your PC and delete any existing files to ensure a clean install environment. fnirsi1014d firmware update work
Copy the File: Drag and drop the FSI-1014.bin file into the root directory of the oscilloscope's drive.
Eject and Power Cycle: Safely eject the drive from your PC. Disconnect the USB cable and turn the oscilloscope OFF.
Initiate Update: Turn the device back ON. You should see the startup screen followed by a horizontal progress bar. This usually takes about 20 seconds to complete, after which the device will automatically reboot. Critical Issue: The "Shifted Screen" Bug
A common issue users face is a screen that appears shifted to the right or left after an update. This happens because FNIRSI used two different LCD manufacturers during production, and each requires a specific firmware variant.
The Fix: If your screen is misaligned, do not panic. Simply download the alternate version of the V3.0 firmware (often labelled as "Screen Version 1" vs "Screen Version 2") and repeat the update process. Loading the opposite file will center the display. Advanced Troubleshooting & Custom Options Updating your FNIRSI 1014D firmware is a straightforward
Bricked or Black Screen: If your device fails to boot entirely after a failed update, you may need to open the unit and format the internal SD card (FAT32) using a computer before re-installing the firmware files.
Custom Firmware: For power users, there are community-driven projects on GitHub that offer improved RMS measurements and even multi-boot menus to switch between official and custom software.
I understand you're asking about performing a firmware update on the FNIRSI 1014D oscilloscope. Here’s a clear, practical answer based on common user experience with this device.
Issue: "Flash Failed" or Stuck at 0%
- Solution: This is often a driver issue. Uninstall the device from Device Manager, unplug the scope, reboot the PC, and try the process again. Ensure you are running the flash tool as Administrator.
Why update firmware
- Fixes stability or measurement bugs.
- Improves sampling, decoupling, or trigger logic.
- Adds new features (waveform math, formats, protocols).
- Restores functionality after corruption.
Update Process
-
Connect Your Device to Your Computer: Using the recommended cable, connect your FNirsi-1014D to your computer.
-
Turn On Your Device: Power on your FNirsi-1014D and ensure it's recognized by your computer. Solution: This is often a driver issue
-
Run the Firmware Update Tool: Open the firmware update tool provided by FNirsi or recommended by the community. This tool might be specific to your device, so ensure you're using the correct one.
-
Follow On-Screen Instructions: The update tool will guide you through selecting and loading the firmware. Follow the instructions carefully, which typically involve:
- Selecting the device model.
- Loading the firmware file you downloaded.
- Initiating the update.
-
Wait for the Update to Complete: The update process might take a few minutes. During this time, do not disconnect your device from the computer or shut down the update tool.
-
Verify the Update: Once the update tool indicates the update is complete, restart your device if prompted. Then, go back into the device's menu to verify that the new firmware version is correctly installed.