Warning—Deceptive site ahead. Attackers on cybermania.ws may trick you into doing something dangerous like installing software or revealing your personal information (for example, passwords, phone numbers, or credit cards). You can find out more about social engineering (phishing) at Social Engineering (Phishing and Deceptive Sites) or from www.antiphishing.org.
We use cookies to enhance your experience. By continuing to visit this site you agree to our use of cookies as specified in our Privacy Policy
ULTIMER® 7752 is a liquid polymer technology from Nalco Water/Ecolab used primarily for wastewater management and clarification. Physical and Chemical Properties
According to recent Safety Data Sheets (SDS), the product has the following typical properties: Appearance : White liquid : Chlorine-like : 3.0 – 4.1 (100% solution at 25°C) Flash Point : > 93.3°C (Pensky-Martens closed cup) Boiling Point Pour Point Vapor Pressure : 20.6 mm Hg (at 37.8°C) Hazard Identification
Under normal use conditions, health injuries are generally not known or expected. : Acute oral toxicity is estimated at > 2,000 mg/kg. Carcinogenicity
: No components are listed as carcinogens at levels ≥ 0.1%. Environmental : Classified as a
potential environmental hazard based on hazard characterization. First Aid & Handling General Advice
: No symptoms are typically expected, but it is standard practice to rinse with water in case of contact. Personal Protection
: Use standard personal protective equipment (gloves, safety glasses) when handling concentrated chemicals.
: If it becomes waste, it generally does not meet RCRA criteria for hazardous waste (40 CFR 261), but should be disposed of according to local regulations. Accessing the Full SDS
Ecolab does not host all SDS documents publicly online. To obtain the most recent and localized version of the official SDS, you should: Ecolab SDS Search portal Search by the product name "ULTIMER 7752" or contact their customer service team at +41 61 466 94 66 dosage instructions for this specific polymer? ULTIMER® 7752 Safety Data Sheet | PDF | Toxicity - Scribd
Navigating the Nalco ULTIMER 7752 MSDS: Safety, Usage, and Performance
When managing industrial water treatment, having the right Safety Data Sheet (SDS) is more than just a regulatory checkbox—it is the foundation of site safety and operational efficiency. Nalco ULTIMER 7752 is a high-performance polymer used extensively in wastewater treatment to improve solids removal and operational reliability.
Below is a breakdown of the critical safety and physical information found in the ULTIMER 7752 documentation to help you manage this product effectively. 1. Key Physical and Chemical Properties
Understanding the "look and feel" of the chemical helps operators identify it quickly and notice any potential stability issues. Appearance: A white liquid. Odor: Distinctive chlorine-like scent.
pH Level: Ranges from 3.0 to 4.1 (100% concentration at 25°C), indicating it is acidic.
Flash Point: > 93.3°C (> 200°F), meaning it is not classified as flammable or combustible under standard conditions.
Pour Point: -5°C, which is important for storage in colder climates to prevent product freezing. 2. Handling and Safety Precautions
While ULTIMER 7752 is designed to be more environmentally friendly than traditional oil-based latex polymers, it still requires standard industrial hygiene.
Personal Protective Equipment (PPE): Always use required PPE, such as gloves and safety glasses, to avoid contact with eyes, skin, and clothing.
First Aid: In the event of an emergency, assess the danger before acting. If skin or eye contact occurs, flush the affected area with water immediately.
Storage: Store in accordance with local regulations. Since its pour point is -5°C, ensure it is kept in a temperature-controlled environment if necessary to maintain its liquid state. 3. Environmental and Operational Benefits
The ULTIMER technology platform was awarded the U.S. Presidential Green Chemistry Challenge Award because it significantly reduces waste compared to standard latex polymers.
Reduced Hazardous Waste: One case study showed a refinery reduced hazardous waste by over 188 tons per year by switching to ULTIMER.
Sustainability: ULTIMER is water-based and does not use hydrocarbon solvents or surfactants, which helps reduce VOC emissions.
Improved Efficiency: It has been shown to increase solids capture efficiency (e.g., from 92% to 98% in some scrubber applications), leading to cleaner effluent and lower sludge disposal costs. 4. How to Obtain the Full MSDS
Nalco Water (an Ecolab company) generally does not provide its official Safety Data Sheets for public download. To ensure you have the most current version for your specific region and language:
Request Online: Use the Nalco Water SDS Request Form to have the document sent to you directly. nalco ultimer 7752 msds
Contact Your Representative: Your local Nalco sales or service representative can provide the latest product data sheets and application instructions tailored to your site.
Need help optimizing your wastewater treatment? You can find expert consultation and service through Ecolab’s Nalco Water Division to ensure you are using ULTIMER 7752 at the correct dosage for your specific system requirements. ULTIMER Polymer Technology | Ecolab
A very specific topic!
NALCO Ultimer 7752 MSDS Review
NALCO Ultimer 7752 is a chemical product offered by Ecolab, a global leader in water, hygiene, and energy technologies. The Material Safety Data Sheet (MSDS) for NALCO Ultimer 7752 provides critical information on the product's composition, hazards, handling, and emergency procedures.
Product Description: NALCO Ultimer 7752 is a specialized polymer-based product used in water treatment applications, particularly in industrial and municipal settings. Its primary function is to control scale and corrosion in water systems.
MSDS Key Points:
Safety Precautions:
Regulatory Information: NALCO Ultimer 7752 complies with various regulations, including:
Conclusion: The MSDS for NALCO Ultimer 7752 provides essential information on the safe handling, use, and disposal of the product. While the product is considered relatively safe, it is crucial to follow proper handling and safety procedures to minimize risks. As with any chemical product, ensure that personnel handling NALCO Ultimer 7752 are trained and aware of its potential hazards and safety protocols.
Cationic water-soluble polymer used for solids-liquid separation, such as sludge dewatering and clarifying oily wastewater. Nalco Water, an Ecolab Company. 2. Physical and Chemical Properties Appearance: White liquid. Chlorine-like. pH (100%): 3.0 – 4.1. Flash Point:
> 93.3°C (> 200°F), indicating it is not classified as a flammable liquid under standard conditions. Freezing/Pour Point: -5°C (23°F). Boiling Point: Approximately 100°C (212°F). 3. Hazards & Handling Health Hazards:
May cause irritation to the eyes and skin upon contact. Inhalation of mists may cause respiratory irritation. Environmental Impact:
While designed for water treatment, concentrated spills can be harmful to aquatic life and should be prevented from entering natural waterways.
Always use appropriate Personal Protective Equipment (PPE), including safety glasses and chemical-resistant gloves. Ensure adequate ventilation. Canadian Centre for Occupational Health and Safety 4. Storage and Stability ULTIMER Polymer Technology | Ecolab
Ultimer 7752 is a water-based liquid polymer primarily used as a water clarification aid in wastewater treatment. According to the ULTIMER 7752 Safety Data Sheet
, this product is a mixture that contains no hazardous ingredients as defined by standard regulatory criteria. 1. Product Identification & Properties Product Name: ULTIMER 7752 Application: Water clarification aid/flocculant Physical State: Appearance/Color: White liquid Chlorine-like 3.0 – 4.1 (100% concentration at 25°C) Flash Point: > 93.3°C (> 200°F) Solubility: Complete in water 2. Hazard Identification & Safety GHS Classification: Not classified as hazardous under normal conditions of use. Potential Health Effects:
No symptoms are expected under normal use for eye contact, skin contact, ingestion, or inhalation. Human Risk: Evaluated as
by manufacturer risk characterization (standard for industrial chemicals). Environmental Risk: Evaluated as 3. First Aid & Emergency Measures Eye Contact:
Rinse with plenty of water. Seek medical attention if symptoms occur. Skin Contact: Wash off with soap and plenty of water. Ingestion: Rinse mouth. Consult a doctor if you feel unwell. Inhalation: Remove to fresh air. No specific symptoms are known. 4. Handling & Storage Safe Handling:
Wash hands thoroughly after handling. Wear suitable gloves and eye/face protection as a standard precaution. Storage Conditions:
Keep containers tightly closed in a cool, dry place. Ensure containers are properly labeled. Environmental Protection:
Prevent runoff from entering waterways, drains, or sewers in the event of a large spill. 5. Operational Advantages
Ultimer technology is designed to be more sustainable than traditional emulsion polymers: Environmental Impact: Does not use hydrocarbon solvents or surfactants. Efficiency:
Can reduce hazardous waste by improving solids capture efficiency (e.g., from 92% to 98%). Ease of Use: ULTIMER® 7752 is a liquid polymer technology from
Does not require complex polymer make-down equipment or long activation times. ULTIMER® 7752 Safety Data Sheet | PDF | Toxicity - Scribd
Nalco ULTIMER® 7752 is a white, water-soluble liquid dispersion polymer used primarily as a flocculant for wastewater treatment. Formulated without hydrocarbon solvents, it functions as a low-hazard agent featuring a chlorine-like odor and a pH between 3.0 and 4.1. Safe handling includes using standard goggles and gloves, with storage required in a cool, ventilated area above -5°C, while avoiding strong oxidizers. For comprehensive safety documentation, visit the Ecolab SDS Request Form ULTIMER® 7752 Safety Data Sheet | PDF | Toxicity - Scribd
NALCO Ultimer 7752: A Comprehensive Review of its Material Safety Data Sheet (MSDS)
NALCO Ultimer 7752 is a chemical product commonly used in various industrial applications, including water treatment, paper manufacturing, and other process industries. As with any chemical substance, it is essential to understand its properties, hazards, and safe handling practices to ensure a safe working environment. In this article, we will review the Material Safety Data Sheet (MSDS) for NALCO Ultimer 7752, providing an overview of its composition, physical and chemical properties, potential hazards, and recommended safety precautions.
Introduction to NALCO Ultimer 7752
NALCO Ultimer 7752 is a product of Ecolab Inc., a leading global provider of water, hygiene, and energy technologies and services. The product is a specially formulated chemical additive used to control scale, corrosion, and deposits in various industrial systems.
MSDS Overview
The Material Safety Data Sheet (MSDS) for NALCO Ultimer 7752 provides critical information on the safe handling, use, storage, and disposal of the product. The MSDS is divided into several sections, each addressing specific aspects of the product's properties and potential hazards.
Section 1: Identification
Section 2: Hazard(s) Identification
Section 3: Composition/Information on Ingredients
Section 4: First Aid Measures
Section 5: Fire-Fighting Measures
Section 6: Accidental Release Measures
Section 7: Handling and Storage
Section 8: Exposure Controls/Personal Protection
Section 9: Physical and Chemical Properties
Section 10: Stability and Reactivity
Section 11: Toxicological Information
Section 12: Ecological Information
Section 13: Disposal Considerations
Section 14: Transport Information
Section 15: Regulatory Information
Section 16: Other Information
Conclusion
The NALCO Ultimer 7752 MSDS provides critical information on the safe handling, use, storage, and disposal of the product. It is essential for users to understand the potential hazards associated with the product and take recommended safety precautions to minimize risks. By following the guidelines outlined in the MSDS, users can ensure a safe working environment and prevent accidents.
References
Understanding the Nalco ULTIMER 7752 MSDS/SDS Nalco ULTIMER 7752 is a high-performance, water-based polymer technology primarily used as a flocculant in industrial wastewater treatment. Unlike traditional emulsion polymers, ULTIMER technology is designed to eliminate the use of hydrocarbon solvents and surfactants, making it a more sustainable option for primary and secondary effluent clarification.
According to the official Safety Data Sheet (SDS), formerly known as the Material Safety Data Sheet (MSDS), this product is generally classified as non-hazardous under standard use conditions. 1. Product Overview and Application
ULTIMER 7752 is a liquid polymer used to flocculate suspended solids. It is particularly effective in:
Wastewater Treatment: Enhancing suspended solids removal in wet gas scrubbers and refinery applications.
Clarification: Used for non-potable raw water and primary/secondary effluent clarification.
Water Reuse: Helping facilities meet effluent limits to enable the recycling and reuse of process water. 2. Hazard Identification
Based on the ULTIMER 7752 Safety Data Sheet provided by Ecolab (Scribd): GHS Classification: Not a hazardous substance or mixture. Physical Hazards: Not flammable or combustible.
Health Effects: Health injuries are not known or expected for the eyes, skin, ingestion, or inhalation under normal conditions of use. 3. Composition and Chemical Properties
ULTIMER 7752 is a mixture where the ingredients are determined to be non-hazardous. Appearance: White liquid. Odor: Chlorine-like. pH: 3.0 – 4.1 (100% concentration at 25°C). Flash Point: > 93.3°C (ASTM D 93 method). Boiling Point: 100°C. 4. First Aid Measures
In the event of accidental exposure, the following steps are recommended:
Eye Contact: Rinse immediately with plenty of water. Seek medical attention if symptoms occur.
Skin Contact: Wash off with soap and plenty of water. If irritation develops, seek medical advice.
Inhalation: Move the person to fresh air. If symptoms persist, consult a physician.
Ingestion: Rinse mouth with water. Do not induce vomiting unless directed by medical personnel. 5. Handling and Storage Guidelines Proper management ensures both safety and product efficacy:
Handling: Wear suitable gloves and eye/face protection (e.g., safety glasses). Avoid contact with skin and eyes.
Storage: Store in original, tightly closed containers in a cool, well-ventilated area. Keep containers labeled and away from incompatible materials like strong oxidizers.
Compatibility: Avoid using equipment made of aluminum, copper, or brass for feeding this chemical. 6. Environmental and Disposal Considerations
While the product is designed for wastewater treatment, concentrated spills should be managed carefully: ULTIMER® 7752 Safety Data Sheet | PDF | Toxicity - Scribd
For workplace safety, legal compliance, and emergency handling, you must obtain the official document directly from Ecolab or your chemical supplier.
Handling:
Storage:
The Nalco Ultimer 7752 MSDS is not a mere compliance document to be filed in a binder. Read as a whole, it tells a story of a powerful but dangerous tool. Its useful essence lies in four key actions: (1) enforce glove and goggle discipline to prevent irritation; (2) control ventilation to minimize monomer exposure; (3) implement dry spill cleanup to avoid slip and environmental damage; and (4) rehearse emergency eye irrigation with eyelid elevation. By translating the MSDS’s 16 sections into daily pre-shift briefings and monthly spill drills, a facility transforms paper into prevention. Ultimately, the most useful essay on any MSDS is the one that compels a worker to read it before the emergency, not during it.
