nitocote nt402 msds InfluentialPoints.com
Biology, images, analysis, design...
Use/Abuse Principles How To Related
 "It has long been an axiom of mine that the little things are infinitely the most important" (Sherlock Holmes)

 

 

Nitocote Nt402 Msds May 2026

The Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) for Nitocote NT402

is a critical document for ensuring the safe handling, storage, and application of this chemical-resistant epoxy coating. Manufactured by Fosroc Nitocote NT402

is a two-part, solvent-free system designed for heavy-duty protection of concrete and metal surfaces. Product Overview and Classification Nitocote NT402

is often utilized in demanding environments such as sewage works, seawater tanks, and manholes due to its high resistance to acids, alkalis, and salts. Unlike older alternatives, it is free from coal tar, pitch, and aromatic hydrocarbons, making it more environmentally friendly with zero VOC content. Hazard Identification

According to the safety data sheet, both the base and hardener components present specific health and environmental risks:

Skin and Eyes: Both components cause skin irritation (H315) and serious eye irritation (H319). The hardener can cause severe skin burns and permanent eye damage (H314).

Sensitization: May cause an allergic skin reaction (H317) upon contact.

Toxicity: The base is classified as potentially damaging to fertility or the unborn child (H360), while the hardener is a suspected reproductive toxicant (H361).

Environmental: Highly toxic to aquatic life with long-lasting effects (H410/H411). Spillage into watercourses must be avoided. Safe Handling and Personal Protective Equipment (PPE)

To minimize exposure, users must adhere to strict safety protocols:

Respiratory Protection: Ensure adequate ventilation. If working in confined spaces with excessive vapor, use an approved respirator.

Hand Protection: Wear chemical-resistant gloves made of rubber (natural or latex), neoprene, or PVC.

Eye Protection: Use tight-fitting chemical splash goggles or a full face shield.

Body Protection: Wear overalls and suitable protective clothing to prevent any skin contact. Barrier creams can provide supplemental protection. Emergency and First Aid Measures

In the event of accidental exposure, the following steps should be taken immediately: nitocote nt402 msds

Skin Contact: Remove contaminated clothing and wash the skin thoroughly with soap and water. Do not use solvents for cleaning skin.

Eye Contact: Flush eyes with water immediately, holding eyelids wide apart, for at least 15 minutes. Seek medical advice promptly.

Inhalation: Move the affected person to fresh air and keep them comfortable. If symptoms persist, seek medical attention.

Ingestion: Do not induce vomiting. Rinse the mouth with water and seek immediate medical help. Storage and Disposal Nitocote NT402

in its original, tightly closed containers in a dry, well-ventilated area away from heat and open flames. Disposal of the product or its container must be handled in accordance with local and national environmental regulations to prevent aquatic contamination.

For further technical details or to request a quote, you can visit the Fosroc Nitocote NT402 product page or consult the full Nitocote NT402 Safety Data Sheet for complete regulatory information.

Do you need specific application instructions or mixing ratios for this product? Nitocote NT402 - Fosroc

Advantages * Environment friendly - no VOC. Totally free of carcinogenic materials like coal tar, pitch and aromatic hydrocarbons. Nitocote NT402 Safety Data Sheet | PDF | Toxicity - Scribd

Fosroc Nitocote NT402 is an environmentally friendly, two-part epoxy resin coating used for chemical and abrasion resistance on concrete surfaces. It is particularly utilized in seawater tanks, sewage works, and foundation waterproofing. Hazard Identification The product consists of a , both of which present distinct hazards: Health Risks

: Both components can cause skin and eye irritation. The base contains substances that may damage fertility or harm the unborn child. Environmental Impact

: It is classified as toxic to aquatic life with long-lasting effects. Safety Features

: Unlike traditional coatings, NT402 contains no VOCs and is free of carcinogenic materials like coal tar or pitch. Safe Handling and First Aid Action Required Eye Contact

Irrigate immediately with copious water for several minutes and seek urgent medical attention. Skin Contact

Wash thoroughly with soap and water; remove contaminated clothing immediately. Inhalation The Material Safety Data Sheet (MSDS) or Safety

Move to fresh air, rest, and keep warm. Seek medical help urgently if symptoms persist. Seek medical attention immediately. Do NOT induce vomiting due to aspiration risks. Protective Measures Nitocote NT402 Safety Data Sheet | PDF | Toxicity - Scribd

NitoCote NT-402 MSDS

Introduction

NitoCote NT-402 is a high-performance, water-based coating product manufactured by NitoCote, a leading company in the field of coatings and linings. The product is designed to provide exceptional corrosion protection and chemical resistance for various industrial applications.

Product Composition

The NitoCote NT-402 coating is a two-component, water-based epoxy system consisting of:

  • Component A (Resin): A water-based epoxy resin
  • Component B (Hardener): A water-based amine hardener

MSDS Sections

Here are the key sections of the MSDS for NitoCote NT-402:

Section 16: Other Information – The "Date of Issue"

The final section of the MSDS is often overlooked but critical. It contains the revision date. MSDS documents expire typically 3-5 years after issue or upon significant formula changes. Always verify you have the current version.

Other Information

  • Date of Preparation/Revision: When the MSDS was last updated.

For a complete and accurate review, it's essential to consult the actual MSDS for Nitocote NT402, as the details will vary based on the product's formulation and intended use. Manufacturers often update their MSDSs, so ensure you're referencing the most current version.

Essential Guide to Nitocote NT402 Safety and Application Nitocote NT402 is a high-performance, two-part epoxy resin coating developed by

for protecting concrete and masonry from chemical attack and water ingress. This tar-free, 100% solids coating is valued for being environmentally friendly with no VOCs, making it suitable for seawater tanks, sewage works, and foundation waterproofing. Understanding the Material Safety Data Sheet (MSDS) —now commonly referred to as the Safety Data Sheet (SDS)

—is critical for ensuring the health of workers and the success of the application. 1. Hazard Identification and Safety Precautions

Nitocote NT402 is classified as a hazardous material. Users must adhere to the following safety protocols: Health Hazards Component A (Resin): A water-based epoxy resin Component

: The product is a skin and eye irritant and may cause allergic skin reactions. It contains substances that may damage fertility or harm an unborn child. Environmental Impact

: It is highly toxic to aquatic life with long-lasting effects. Prevent any spills from entering drains or waterways. Required PPE

: Wear chemical-resistant gloves (nitrile is often recommended), safety goggles or a face shield, and protective overalls. Ventilation

: Ensure adequate ventilation during mixing and application to avoid inhaling vapors. 2. First Aid Measures

In case of accidental exposure, follow these immediate steps and seek medical attention if symptoms persist: Eye Contact

: Immediately flush with low-pressure water for at least 15 minutes, holding eyelids apart. Remove contact lenses if present. Skin Contact

: Remove contaminated clothing and wash the affected area thoroughly with soap and water. Inhalation

: Move the person to fresh air and keep them warm and at rest in a comfortable breathing position. : Rinse the mouth with water. Do NOT induce vomiting 3. Application and Handling Guidelines

Proper handling ensures the coating performs as specified and minimizes waste: Nitocote NT402 - Fosroc

Fosroc Nitocote NT402 is a two-part, 100% solids, solvent-free epoxy resin coating designed for high-performance protection of concrete and metal surfaces. Unlike its counterpart Nitocote ET402, the NT402 version is tar-free and contains no VOCs, making it an environmentally friendly choice for confined spaces or sensitive projects. ⚠️ Hazard Identification (MSDS Overview)

Nitocote NT402 is supplied as a "Base" and a "Hardener." Each component carries specific health and environmental risks that require strict adherence to Safety Data Sheet (SDS) guidelines. Health Risks Nitocote NT402 - Fosroc

Advantages * Environment friendly - no VOC. Totally free of carcinogenic materials like coal tar, pitch and aromatic hydrocarbons. Fosroc Nitocote NT402 - SCP Products

10. Physical & Chemical Properties

| Property | Value | |----------|-------| | Appearance | Viscous liquid | | Odor | Slight amine-like (Part B) | | pH (mixed) | ~9–10 (alkaline) | | Viscosity (mixed) | 750–1000 cP | | Density | ~1.10–1.20 g/cm³ | | Solubility in water | Miscible (water-based system) | | VOC content | <50 g/L (low VOC) |

Nitocote NT402 MSDS: A Comprehensive Guide to Safety, Handling, and Compliance

4.2 Skin Contact

  • Symptoms: Redness, burning, dry skin (due to solvent defatting).
  • Action: Remove contaminated clothing and shoes. Wash thoroughly with soap and water for 15 minutes. Do not use solvents or thinners to remove the product from skin (this increases absorption). Seek medical advice if irritation persists.

4.3 Eye Contact

  • Action: Hold eyelids open and rinse with copious amounts of lukewarm water for at least 15 minutes. Avoid strong water jet. Immediate ophthalmological assessment is required, as solvents can cause corneal damage.