Guide: Using Phison MPALL v5.13.0C to Repair USB Drives Phison MPALL (Multi-Port ALL-in-one) is a specialized production-level tool used to "mass produce" or repair USB flash drives featuring Phison controllers, such as the PS2251-11 (PS2311)
. It is widely used for fixing "write-protected" errors or unbricking drives that are no longer recognized by Windows. Key Features of v5.13.0C Controller Support
: Compatible with a wide range of Phison chips, including the PS2251-11 (PS2311) and older versions like Write-Protection Removal
: Specifically effective for unlocking retail USB drives (like official Windows 10/11 installation sticks) that are locked at the hardware level. Mass Production (MP)
: Can reflash firmware, change VID/PID, and create custom partitions. How to Use MPALL v5.13.0C
This tool is powerful but can permanently brick your device if used incorrectly. Follow these steps carefully: Preparation Download and extract the Phison MPALL v5.13.0C Identify your controller using a tool like ChipGenius GetInfo.exe
(included in the MPALL folder) to ensure it is a Phison chip. Recognition MPALL_F1_9000_v513_0C.exe Plug in your USB drive and click the
button. The drive should appear in one of the 16 numbered slots. Basic Repair (No Mapping) For standard write-protection removal, check the No Mapping
. The progress bar may stop at ~20%. If this happens, close the app, re-insert the USB, and run the process again until it finishes with a green bar. Advanced Configuration If a simple start doesn't work, click New Setting Select your specific controller type (e.g., ) and load corresponding burner ( ) and firmware files if necessary. Common Troubleshooting "No Mapping" Error
: This often means the controller isn't supported by this specific version or you need to enter "Test Mode" by shorting pins on the physical chip. Half-Brick State
: If the drive stops responding mid-format, Windows may prompt to "Insert Disk." Re-running MPALL usually resolves this. Modern Controllers : Some newer sticks with yellow or red bands (likely
) may not work with this version and require newer tools like PhisonWP v0.1 Learn more Phison MPALL v5.13.0C - USBDev.ru
Phison MPALL (Multi-Port Mass Production Tool) v5.13.0C is a low-level firmware utility used to repair and reformat USB flash drives that use Phison chip controllers
. It is often used as a "last resort" to fix issues like "Write Protection," "No Media" errors, or corrupted firmware. Key Features and Support Chip Compatibility : Specifically designed for Phison controllers such as , and other PS2251-xx series. Repair Capabilities
: Can restore a drive's functionality by flashing new firmware or resetting the controller configuration. Identification : It is essential to use a tool like ChipGenius
first to confirm your USB drive has a Phison controller before attempting to use MPALL. Basic Repair Steps Extract the Utility
: Unzip the Phison MPALL v5.13.0C distribution and run the main executable (usually MPALL_F1_...exe Connect and Update : Plug in your corrupted flash drive and click the button in the interface to let the tool detect the device. Configuration Configuration "Basic Adjustment" "New Configuration"
Adjust the controller and IC settings based on the information found from your initial identification tool (like ChipGenius). Start Flashing : Once configured, press to begin the mass production (re-flashing) process. Important Precautions : Using this tool will permanently erase all data on the USB drive. Risk of Bricking
: Using the wrong firmware or configuration settings can permanently disable the USB controller. Permissions phison mpall v5130c hot
: On some systems, you may need to run the application with Administrative privileges to allow low-level hardware access.
For detailed troubleshooting on specific errors like "Write Protection," you might also consider Windows DiskPart
Phison MPALL (Multi-Port ALL-in-one) is a low-level production tool used to format, repair, and reflash firmware on USB flash drives equipped with Phison controllers . The version
is a more recent release intended to "digest" newer drives, though experts often suggest using older versions for legacy hardware. ⚠️ Critical Warnings Before Starting Data Loss: This process will permanently erase all data on the USB drive. Bricking Risk:
Using the wrong firmware or settings can "brick" the drive (render it completely unusable). Controller Specificity:
This tool only works if your drive has a Phison controller (e.g., PS2251-68, PS2251-07). Step 1: Identify Your Hardware
Before using MPALL, you must know your drive's exact controller and memory type. Download a tool like ChipGenius Flash Drive Information Extractor Plug in your USB and run the tool to find the Controller Model (e.g., PS2251-07) and the Flash ID (FID) Step 2: Prepare the Software Download MPALL v5.13.0C and unzip it to a folder on your desktop. Firmware Files: MPALL often requires two binary files: Burner File (BN): BN07V106.BIN Firmware File (FW): FW07FF01V101M.BIN
Note: These files must match your controller model exactly (e.g., "07" for PS2251-07). Step 3: Configure MPALL MPParamEdit_F1.exe from the unzipped folder. "Basic Adjustment" "New Configuration" In the configuration window: Controller: Select your controller model (e.g., PS2251-07). Host Port: Set to USB 2.0 or 3.0 depending on your physical port. Flash Setting: Leave as "Auto Detect" if possible. Check "Do ISP" and point the fields to the files you downloaded. to create a configuration file. Step 4: Run the Flash Process MPALL_F1_9000_v5130C.exe
. Your drive should appear in one of the slots (usually highlighted in white or green). If the drive is not detected, you may need to use
(shorting pins on the internal chip), though this is advanced and risky.
and wait for the progress bar to finish. A green box indicates success; a red box indicates an error code. Troubleshooting Common Errors Error Code Meaning / Solution
Indicates a low-level format error. Try reducing the "Target Capacity" in settings. Flash No Support The FID of your memory chip is not in the current IDBLK_TIMING.dll library. You may need a different version of that DLL. Drive Not Found
Try a different USB port (preferably USB 2.0) or run the program as Administrator.
Are you trying to fix a specific error like "Write Protected" or is the drive not showing up at all? How to use Phison MPALL? | Tom's Hardware Forum
Phison MPALL v5.13.0C is a specialized mass production (MP) tool used to repair, reformat, and update the firmware of USB flash drives equipped with Phison controllers. This version is particularly effective for newer controllers like the PS2251-07 (PS2207) and is often used to resolve "Write Protect" errors or "No Media" status. Core Functionality
The software interacts directly with the NAND flash controller chip to:
Restore Unusable Drives: Recovers sticks that aren't recognized by standard Windows tools.
Firmware Updates: Overwrites corrupted firmware using specific burner (.BIN) files. Guide: Using Phison MPALL v5
Partition Management: Allows for "flipping the removable bit" to make Windows see multiple partitions or treat the drive as a fixed local disk.
Bad Block Management: Identifies and isolates physical NAND errors to extend the life of the drive. Step-by-Step Usage Guide
Before starting, use a tool like ChipGenius to verify that your USB drive actually contains a Phison controller; MPALL will not work on other brands.
Preparation: Unzip the MPALL v5.13.0C distribution and run the main executable (MPALL_F1_7F00_...exe).
Detection: Connect your drive and click the Update button. If the drive is compatible, it will appear in one of the numbered slots. Configuration: Open the MPParamEdit_F1.exe utility. Select Basic Adjustment and New Setting. Choose your specific controller model (e.g., PS2251-07).
Link the correct Burner and Firmware files (typically found in a subfolder of the MPALL download).
Execution: Save the configuration, return to the main MPALL window, and press Start.
Caution: This process is destructive and will erase all data on the drive. Common Troubleshooting How to use Phison MPALL? | Tom's Hardware Forum
Phison MPALL v5.13.0C is the go-to mass production utility for flashing and repairing corrupted USB drives equipped with Phison controllers.
If you are dealing with a "hot" or highly requested solution to unbrick a dead flash drive, remove write protection, or create custom CD-ROM partitions on a thumb drive, this guide outlines the process. 🛠️ The USB Recovery Toolkit
To fix or modify your Phison-based controller, you will need a precise combination of software:
ChipGenius: Used to identify your drive's Controller Part-Number and firmware version.
Phison MPALL v5.13.0C: The main executable flashing utility.
Specific Burner File (.bin): Matched to your controller (e.g., PS2251-XX).
Specific Firmware File (.bin): Matched to your NAND flash memory type. 📝 Step-by-Step Flashing Guide Extract Hardware Info Download and run ChipGenius with your USB drive plugged in.
Write down the VID, PID, and Chip Part-Number (e.g., PS2251-07). Configure MPALL
Extract Phison MPALL v5.13.0C from a trusted database like USBDev. Open MPParamEdit_F1.exe to build your configuration file. Select Basic Setting and New Setting. Input your specific VID and PID from Step 1. Map the Firmware
Check the "No. of Partition" box if making a multi-zone or bootable drive. The Drive Becomes 0 Bytes (Raw)
Under the controller path, browse and select your specific Burner file and Firmware file. Execute the Flash Save the configuration as MP.ini and close the editor. Open MPALL_F1_7F_v513_0C.exe as an administrator.
Click Update to let the program map your drive's current slot.
Click Start to begin the low-level formatting and firmware write.
⚠️ Critical Warning: Using the wrong burner or firmware file will permanently hard-brick your USB drive. Always verify that your files correspond perfectly to the controller returned by ChipGenius.
The "hot" status of Phison MPALL v5.13.0C refers to its popularity in niche hardware communities as a powerful, albeit risky, "mass production" (MP) tool used to repair or modify USB flash drives with Phison controllers. It is frequently discussed on specialist forums like
for its ability to revive "bricked" drives that appear dead or write-protected. The "Deep Story" of MPALL The Power User's "Last Resort"
: MPALL is official factory-grade software never intended for consumers. It allows for low-level formatting, partition resizing, and even creating "fake" CD-ROM partitions on a thumb drive. The Version 5.13.0C Legacy
: This specific version is often sought out because it supports newer controller chips like the PS2251-19 (PS2319) . Users in community hubs like the Old-Games forum Tom's Hardware
track these releases to fix retail drives that standard Windows tools cannot touch. Risk of Bricking
: Using the wrong settings or incompatible firmware within MPALL can permanently destroy a drive. The "story" is often one of high-stakes experimentation, where users risk their hardware to bypass manufacturer-imposed limits like write protection. Why it's "Hot" (Trending and Critical)
The tool and Phison firmware at large recently gained renewed attention due to widespread stability issues:
Hard - Восстановление USB Flash-диска. | Страница 2
For hobbyists building their own electronics or modifying existing hardware, having a stable, relatively recent version of MPALL allows for fine-tuning. It grants access to specific NAND flash settings that can optimize performance or change how a drive identifies itself to the operating system.
The version number v3.130C is legendary in the data recovery underground. Released during the peak of the USB 2.0 and early USB 3.0 era, this version became the "golden key" for a specific family of Phison controllers (most notably the PS2251-50 (UP12) and PS2251-60).
Most modern tools are bloated or refuse to work with older chips. v3.130C is lean, aggressive, and incredibly effective at forcing a dead drive back to life.
Before you rush to download and run this tool, you need to understand the risks. The term "hot" can also mean "dangerous."
"Analysis and Application of Phison MPALL v5.13.0C Firmware Tool for USB Drive Recovery Under Hot-Plug Conditions"
or, if “hot” means widely discussed:
"Performance and Reliability Assessment of Phison MPALL v5.13.0C in Firmware Restoration of Flash Drives"