The Videojet 1280 Continuous Inkjet (CIJ) printer is designed for manufacturers seeking reliable coding with minimal maintenance and simplified installation. This guide summarizes the key steps for physical installation, initial setup, and finding official documentation. Getting the Official Manual
For detailed diagrams and technical specifications, refer to the official Videojet 1280 Documents or Scribd's 1240/1280 Operator Manual. 1. Pre-Installation Requirements
Before unboxing, ensure your production site meets these environmental and electrical standards:
Electrical: Requires a nominal supply power of 100-240 VAC at 50/60 Hz, 70W. videojet 1280 manual pdf install
Environment: Operates between 32°F and 122°F (0°C to 50°C) with 0% to 90% RH (non-condensing).
Physical Space: The dry, unpacked unit weighs approximately 39.5 lbs (17.9 kg).
Grounding: The printer must be connected to an AC power supply with a protective ground conductor to prevent electrical shock and static discharge. 2. Physical Setup and Mounting Videojet 1240, 1280, 1580 Operator Manual | PDF - Scribd The Videojet 1280 Continuous Inkjet (CIJ) printer is
If you cannot access the PDF, you can request a copy directly from Videojet support:
customerservice@videojet.comNote: If this is a new installation on a production line, it is highly recommended to have a certified Videojet technician perform the setup to validate the warranty.
After installation, you must validate the setup. The manual provides a Commissioning Checklist. Reproduce it here: Mistake #2: Ignoring the Solenoid Vent
| Check | Pass/Fail | | :--- | :--- | | Ink and make-up bottles are correctly seated | ______ | | Printhead cable is fully seated (no kinks) | ______ | | Ground resistance <1 ohm from printer to earth | ______ | | Make-up bottle vents open (no vacuum lock) | ______ | | Emergency stop works (pneumatic shutoff, if fitted) | ______ | | Sample prints – 1,000 consecutive without error | ______ |
⛑️ Fire Safety: Store spare fluids in a metal flammable cabinet, away from the printer. The manual requires a portable fire extinguisher (Class B) within 10 feet of the printer.