Vijeo Designer 6.2 Upgrade Reference Number _verified_

The primary upgrade reference number for a Vijeo Designer 6.2 single-user license is VJDSNDTGSV62M. For a specific license update, the part number is VJDUPDTGAV62M. Key Reference Numbers

VJDSNDTGSV62M: Standard reference for Vijeo Designer 6.2 single license.

VJDUPDTGAV62M: Reference for updating an existing license to version 6.2.

VJDHTGTSPV62M: Specific code used within the software (Help -> About -> License Tab) to enable the Generic Runtime PC feature. Upgrade Process Overview

To successfully transition to Vijeo Designer 6.2, follow these critical steps based on your starting version:

Project Migration Path: Older projects cannot always be opened directly in 6.2. You must follow a sequential import process: Versions < v4.3: Import into v4.3 first. Versions v4.3 to v4.5: Import into v4.6 or v4.7. Versions v4.6 to v6.1: Import into v6.1.

Version v6.1: These files can be opened directly in Vijeo Designer 6.2.

Clean Installation: When installing a new service pack (like SP9), it is often recommended to uninstall the previous version and clear the registry path HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Schneider Electric\Vijeo-Designer62B\ before performing a fresh install with your purchased reference and serial number.

Registration: Use the License Manager tool (found in the Schneider Electric program folder) to register the software via web or phone after installation to fully activate the license. Technical Compatibility

OS Support: Version 6.2 is compatible with Windows 8.1 and supports Internet Explorer 7.0 or greater.

Hardware: It supports a wide range of Magelis (now Harmony) HMI series, including XBT GT, STO/STU, GTO, iPC, and Smart models.

For official technical assistance or to purchase these licenses, you can contact the Schneider Electric Customer Care Center.

The primary reference number for a standard Vijeo Designer 6.2 update license VJDUPDTGAV62M

. This part number is used when upgrading from a previous license version (such as V6.1) to the V6.2 configuration software. Schneider Electric Reference Numbers for Vijeo Designer 6.2

Depending on your specific license type or the component you are upgrading, use the following reference numbers: VJDUPDTGAV62M

: Standard update license for Vijeo Designer 6.2 configuration software. VJDSNDTGSV62M : Single-user full license for Vijeo Designer 6.2. VJDUPTRPRV62M

: Update license for Vijeo Designer Intelligent Data Services (IDS) Report Printing V6.2 (supersedes VJDUPTRPRV61M). VJDHTGTSPV62M

: Specific code used within the software (Help > About > License > Upgrade) to enable the Generic Runtime PC Schneider Electric How to Apply an Upgrade

To register your upgrade or change features within the software:

To upgrade to or within Vijeo Designer 6.2 , the specific reference number you need depends on your current license type and the target functionality. Primary Reference Numbers for Vijeo Designer 6.2

The following are the standard Schneider Electric part numbers used for acquiring or upgrading to version 6.2: VJDUPDTGAV62M : This is the general Update License vijeo designer 6.2 upgrade reference number

used to upgrade an existing license (such as version 6.1) to Vijeo Designer 6.2. VJDSNDTGSV62M : The reference number for a Single User License

. This is typically required when upgrading from a much older version (like 5.1) to a full 6.2 single-station license. VJDHTGTSPV62M Upgrade Code

specifically used within the software interface (Help > About > License Tab) to enable the Generic Runtime PC feature for Vijeo Designer 6.2. VJDUPTRPRV62M : An update license specifically for Intelligent Data Services (IDS) Report Printing , upgrading it to version 6.2. VJDGNDTGSV62M : The reference number for a Group License (multi-user) for Vijeo Designer 6.2. Schneider Electric Upgrade Path and Compatibility Version Jumping : If you are coming from a very old version like

, the project must typically be imported through intermediate versions (e.g., v4.3 → v4.6 → v6.1) before it can be opened in v6.2. Installation Note

: Vijeo Designer 6.2 can typically reside on the same PC as one version older (like 6.1 or 6.0), provided you do not choose to replace the older version during the installation prompt. Service Packs

: When installing a Service Pack (like SP9), the software often inherits the reference and serial number from the base v6.2 installation already on the registry. Schneider Electric

Upgrading Vijeo Designer 6.2: A Comprehensive Guide

Introduction

Vijeo Designer 6.2 is a popular human-machine interface (HMI) software used for designing and implementing industrial automation applications. As technology advances, it's essential to upgrade to newer versions to take advantage of enhanced features, improved performance, and increased security. In this piece, we'll discuss the process of upgrading Vijeo Designer 6.2, focusing on the reference number.

Understanding the Reference Number

When upgrading Vijeo Designer 6.2, a reference number is required to ensure a smooth and valid upgrade process. The reference number is a unique identifier assigned to your software license, which verifies your eligibility for the upgrade. It's essential to have this number readily available to avoid any delays or issues during the upgrade process.

Pre-Upgrade Checklist

Before initiating the upgrade, make sure to:

Verify your current version: Ensure you're running Vijeo Designer 6.2 and note down the current version number.
Check compatibility: Confirm that your system meets the requirements for the new version, including hardware, software, and operating system compatibility.
Backup your projects: Save a copy of your existing projects and configurations to prevent data loss during the upgrade process.
Obtain the reference number: Retrieve your software license reference number, usually found in the software documentation, license certificate, or by contacting the software provider.

Upgrading to Vijeo Designer 6.9 or later

To upgrade Vijeo Designer 6.2 to version 6.9 or later:

Purchase the upgrade package: Contact the software provider or an authorized distributor to acquire the upgrade package, which includes the new software version and documentation.
Launch the upgrade wizard: Run the upgrade wizard and follow the on-screen instructions to begin the upgrade process.
Enter the reference number: Input your reference number when prompted to validate your license and proceed with the upgrade.
Follow the upgrade process: The wizard will guide you through the upgrade process, which may include installing new software components, updating configurations, and migrating projects.

What's New in Vijeo Designer 6.9 and later

The latest versions of Vijeo Designer offer several enhancements, including:

Improved security: Enhanced security features, such as secure boot and secure communication protocols.
Increased performance: Optimized software performance, resulting in faster project loading and execution.
New features: Additional features, such as improved alarm management, new graphics capabilities, and enhanced connectivity options.

Conclusion

Upgrading Vijeo Designer 6.2 to a newer version requires careful planning and attention to detail, particularly when it comes to the reference number. By following the pre-upgrade checklist and upgrade process outlined above, you can ensure a successful and smooth transition to the latest version, taking advantage of new features, improved performance, and enhanced security.

Reference

Vijeo Designer software documentation (version 6.2 and later)
Software provider's website and support resources
Schneider Electric's Vijeo Designer product page

The primary reference number used to upgrade from Vijeo Designer 5.1 (single user) to Vijeo Designer 6.2 VJDSNDTGSV62M

. If you are looking for a general update license code for version 6.2, VJDUPDTGAV62M is also frequently cited by Schneider Electric for this configuration software The Upgrade "Story"

Upgrading your HMI software is less of a single click and more of a multi-step journey to ensure your legacy projects don't get left behind. Step 1: Get Your "Passport" (Reference Numbers)

When you purchase or receive your upgrade, you'll need two keys: the Reference Number (the part numbers mentioned above) and a Serial Number provided by Schneider Electric. Step 2: Clear the Old Path

For a clean transition to 6.2, it is often recommended to uninstall older versions via Windows "Add or Remove Programs". In some technical troubleshooting scenarios, you may also need to clear specific registry paths, such as:

HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Schneider Electric\Vijeo-Designer62B\ Step 3: The Installation Ritual

Install the base Vijeo Designer v6.2. When prompted, enter your purchased reference and serial numbers. After the base is in place, you should apply the latest Service Packs (like ) by right-clicking the executable and choosing "Run as Administrator" to ensure all drivers and patches land correctly. Step 4: Registering Your Domain Once installed, launch the License Manager

tool (found in your Schneider Electric program folder) to officially register the software via the web or phone. Step 5: Migrating Your Legacy Projects

If your project is very old (e.g., v4.1), you cannot jump directly to 6.2. You must follow a "stepping stone" path: projects must first be imported into , move it to Finally, a project can be opened directly in Essential Reference Table License Type Reference Number Upgrade from V5.1 (Single) VJDSNDTGSV62M General 6.2 Update License VJDUPDTGAV62M Generic Runtime PC Enablement VJDHTGTSPV62M Group License (6.2) VJDGNDTGSV62M Are you looking to upgrade a specific HMI model 's hardware at the same time as this software update?

For upgrading to Vijeo Designer 6.2, the specific reference number you need depends on your current license type (Single, Group, or Team).

💡 Important: Schneider Electric has announced that many Vijeo Designer 6.2 licenses (like VJDUPDTGAV62M) reached their end of commercialization as of September 2025 [1.2.3]. 🛠️ Common Reference Numbers for 6.2 Upgrade

Use these codes to identify the correct upgrade path for your software:

VJDSNDTGSV62M: Standard reference for a Single User License upgrade from a previous version (e.g., 5.1 or 6.1) to 6.2 [1.2.2].

VJDUPDTGAV62M: Specifically used for an Update License to move from version 6.1 to 6.2 on a single station [1.2.4].

VJDUPTRPRV61M: The previous version for IDS Report Printing; check for a 6.2 equivalent if updating specific report tools [1.2.1]. 💻 Technical Compatibility Specification Operating System

Windows 7, 8.1, and Windows 10 Professional (32/64 bit) [1.3.7] Supported Hardware

Harmony XBT GT, STO & STU, HMI GTO, iPC, and Smart series [1.2.4] Latest Service Pack

SP12 is the current cumulative update for version 6.2 [1.3.11] 🔄 Project Migration Guide

If you are upgrading an older project (e.g., v4.1) to v6.2, you must follow an intermediary step process: v4.1 to v4.3: Import the project into version 4.3 [1.5.2].

v4.3 to v6.1: Open and save the project in version 6.1 [1.4.9]. The primary upgrade reference number for a Vijeo

v6.1 to v6.2: Projects saved in v6.1 can be opened directly in any version of 6.2 [1.3.10]. If you'd like, I can help you:

Find the download links for the latest Service Packs (SP12).

Walk through the license registration process using the License Manager tool.

Check if your specific HMI model is compatible with version 6.2.

1. Overview

When upgrading HMIs (Human Machine Interfaces) or software environments within the Schneider Electric ecosystem, the term "Reference Number" can refer to two distinct concepts: the Commercial Order Code (Part Number) required to purchase the upgrade license, or the Hardware Reference stored inside the Magelis HMI terminal that dictates compatibility. Understanding the distinction between these two is critical for a successful upgrade to Vijeo Designer 6.2.

1. Understanding the Reference Numbers

Schneider Electric uses specific "Reference Numbers" (Order Codes) to identify software products. For Vijeo Designer 6.2, the numbers differ based on whether you are buying a full package or an upgrade, and whether you use a physical dongle or a software license.

Important Note: Vijeo Designer 6.2 is often sold as part of the SoMachine or SoMachine Basic suite, or as a standalone HMI configuration tool.

2. The Anatomy of the Upgrade Reference Number

The standard upgrade reference for Vijeo Designer 6.2 follows the pattern:

VJDSND62-UPG-01 (Single license) or VJDSND62-UPG-10 (10-pack)

Interesting Note: The reference UPG-00 exists internally at Schneider but is never customer-facing—it indicates a beta upgrade that bypasses version checks.

4. Migration to EcoStruxure (Important Consideration)

Vijeo Designer 6.2 is part of the legacy software line. Schneider Electric has transitioned to EcoStruxure Machine Expert.

If you are upgrading today: You might not be able to buy a pure "6.2 Upgrade" easily. You may be directed to buy EcoStruxure Machine Expert.
Compatibility: EcoStruxure Machine Expert includes Vijeo Designer runtime capabilities and can convert older .vdz files.
Reference for new suite: If you cannot find VJDSNDUP, look for EMESD (EcoStruxure Machine Expert - Basic/Standard) or consult your distributor for migration path references.

5. Summary Checklist

Locate your current License Serial Number.
Contact a distributor to order Reference VJDSNDUP (or the current equivalent).
Download the installer from the Schneider Download Center.
Backup projects before installing.

Where to find downloads: Go to the Schneider Electric website -> Support -> Download Center -> Search "Vijeo Designer 6.2". You will need a registered account to access the files.

Part 8: Frequently Asked Questions (FAQ)

Q: Can I use Vijeo Designer 6.2 to open a project from Vijeo Designer 5.x with only the upgrade reference number? A: No. V5.x projects require a full license purchase (VJDSNDT62F). The upgrade path only supports V6.0 and newer.

Q: Is the reference number the same for multi-user licenses? A: No. For concurrent (network) licenses, the reference number ends with a “N” (e.g., VJDSNDT62UPGN). Consult your network license agreement.

Q: My upgrade reference number was rejected on the portal. What next? A: First, ensure you are on the correct regional activation server (USA, EU, Asia). Second, verify your old version is activated. If both are fine, open a ticket with Schneider – include both the old and new reference numbers.

Q: Does the upgrade work with Vijeo Designer Lite (free version)? A: No. Vijeo Designer Lite is a limited, non-commercial version. You cannot upgrade it to full V6.2 using any reference number. You must buy a full license.

Common Reference Numbers (General Guidelines)

Since software catalogs change, always verify with a distributor, but these are the historical codes:

The "Upgrade" Reference: To specifically purchase the upgrade license (to move from an older version like 6.1 or 5.x to 6.2), you typically look for the suffix UP (e.g., VJDSNDUP). Verify your current version : Ensure you're running

Requirement: To legally use an Upgrade reference, you usually must provide proof of ownership of a previous version (License Card or Serial Number).

Part 7: How to Find Your Old Reference Number (Needed for Upgrade)

You cannot use VJDSNDT62UPG without proving you own a previous version. To find your old reference number:

Check your original purchase invoice – Look for a line item like “VJDSNDT61F” or “VJDSNDTV60CD”.
Within Vijeo Designer (old version): Go to Help → About Vijeo Designer → License Information. The reference number is often embedded in the license string.
Schneider’s License Manager – Run Schneider Electric License Manager from the Start Menu. Click on “Existing Licenses” – the reference number is listed as the Product Code.
USB Dongle – If your license is on a green or blue dongle, use the Dongle Viewer utility (download from Schneider’s site). The reference number appears under “Software Key.”

If you cannot locate any proof of purchase, contact Schneider’s Software License Support with the serial number of your USB dongle or the email address used for initial registration. They can retroactively issue a reference number.